App Controlled 4 Channel Car Digital Amplifier With Integrated DSP for Toyota

$49.00
  • Product Code: AMPTOYOTA
  • Availability: In Stock



















APP CONTROLLED 4 CHANNEL CAR DIGITAL AMPLIFIER WITH INTEGRATED DSP FOR TOYOTA

Description

- Plug and Play
- USA Imported Chips
- Easy Installation
- Original MP3/CS/DVD player supported
- 9-Band Graphic EQ
- Independent EQ Setting
- 5 Pre-set EQ Setting
- Time Alignment
- 3D Sound Surrounding
- Dynamic Bass
- EQ adjustment
- Built-in DSP
- Power Watt MAX
- Power Watt MAX  54W x 4
- Power Watt MAX  26W x 4

Specifications

SAFETY CONSIDERATIONS

1.   Make sure your car has a 12 volt DC negative ground electrical system.
2.   Do not install components inside the engine compartment or expose them or expose them to water, excessive humidity, dust or dirty.
3.   Never run cables outside the vehicle or install the amplifier next to mechanical or electronic devices.
4.   Operate the amplifier only when internal temperature is between 0 degree and 55 degrees. This processor must have a minimum 
      3cm distance from any structure. There must be good air circulation around the chassis.
5.   Make sure the location you choose for the component does not affect the correct functioning of the vehicle's mechanical and
      electronic devices.
6.   Make sure the power cable does not short circuit during installation and connection.
7.   Use extreme caution when cutting or drilling the car chassis checking that there is no electrical wiring or structural elements
      underneath.
8.   Use rubber grommets to protect the wire when running through holes in metal and use proper materials if close to heat-generating
      devices.
9.   Make sure all cables are properly secured along there entire length. Also make sure their outer protective Jacket is flame resistant
      and self-extinguishing. Secure the connected cables close to the terminal blocks with wire ties,
10. Pre-plan the configuration of your new amplifier and the best wiring routes to ease installation. Use high quality cables, connectors
      and accessories.

Included

1. Amplifier Box
2. Amplifier Harness for Toyota
3. Quick Guide Paper

Included

FAST Delivery with Australia Post Eparcel

  • Once payment has cleared our account the goods will be dispatched, often same day.
  • Depending on your location in Australia,delivery times usually take between 1-8 days, and within Australia Post constraints, as a guide NSW: 1-2 days, VIC & QLD: 2-4 days, SA & FNQ: 3-5 days, WA - up to 8 days. For faster delivery, you can choose Express Post on check out.
  • Please ensure accurate address is listed as well as a correct contact number.

Payment details

  • Please make payments within 5 days of your checkout, if there is further delay you only need to let us know and we can extend the payment time.
  • Once payment has cleared our account the goods will be dispatched, often same day. For the fastest way of transferring funds, and overall better ebay shopping experience, we recommend PayPal, it is instantaneous.
  • If paying by EFT directly into our bank account, we will provide our account details upon request. Please be aware bank deposit funds usually clear overnight.

Choose your payment method

  • Phone: Call us to pay by Mastercard or Visa.
  • Paypal: The fastest way to transfer funds PayPal account, credit or bank transfer.
  • Bank Deposit: Direct bank deposit.
  • All units have been tested twice to ensure your unit will function as it should. Firstly, units tested full functionally at manufacture. Secondly, units tested full functionally at Sydney showroom and workshop at: 11/55-59 Norman St, Peakhurst, NSW, 2223, Australia.
  • A full 12 month warranty is in effect from the original date of purchase when purchased.
  • If you do encounter a problem, contact us through message and our customer service will guide you through, most of the time is just because customer not familiar with the settings of the units. Please Note: For all returned non-faulty items (identified by our technical department), the buyer is responsibility on the shipping and handling fee on any returned items. If buyer sends back the item by C.O.D. service, item will NOT be accepted.
  • Buyer are responsible for sending the product to us and for the payment of any shipping charges to us, also buyer are responsible for the cost of removing and refitting the product.
  • 2 month Australia warranty only covers new products purchased from us.
  • Pre-owned, display and ex-demonstration, products and accessories not originally supplied by us are excluded.
  • The warranty covers all labour and parts needed to fix the problem, and warranty covers the postage to return your product.
  • You must provide suitable proof of purchase for the product. This includes a copy of the original invoice showing purchase date, name and ID.
  • Warranty does not cover physical damage, severe moisture or electrocution due to static short circuit.

Write a review

Note: HTML is not translated!
    Bad           Good